Epoxy and concrete floor questions from Independence
Common questions by floor type (short answers). If you do not see your question, please give us a call.
Not listed? Ask us.(816) 325-3549
Are epoxy resin floors expensive?
More expensive than painting, but much cheaper than replacing the floor. Most of the cost will be labor. It takes far more hours to grind, fill cracks and reduce dust than it does to apply coatings.
If the concrete in Independence is clean and in good condition, coating will be much cheaper. We will give you an accurate quote after seeing the floor.
What is the cost of epoxy flooring per sq ft?
We cannot give a per square foot price. The price varies depending on size.
Smaller areas such as laundry rooms and larger areas such as two-car garages have similar set up costs (equipment for grinding and mixing), meaning the price per square foot reduces in larger areas. Measure the room, send us a few photos and we can give you an accurate price.
Is epoxy flooring good for a house?
Yes in appropriate rooms. Garages, basements, laundry rooms and recreation rooms are a good choice. It will seal the concrete, be easy to wipe and reduce dust.
It is not suitable for outdoor areas. If a smooth coating is desired, we add grit in any wet areas. Many homes in Independence are built on older slabs, so we will assess the condition of the concrete and give you a suitable system.
Can you epoxy over an already epoxy floor?
Yes, if the old coating is still firmly attached. We will scuff/grind the old coating to allow the new coating to adhere, clean and apply new coatings.
If the old floor is peeling, bubbling or lifting in tire marks, we will remove it first. Applying coating on a failing surface will just cause the new floor to stick to a surface that is failing.
What are the different types of epoxy flooring?
By chemical type, 100% Solids epoxies create the thickest coatings. Water based coatings produce thin coatings and are suitable for light duty. Solvent based coatings are becoming less popular.
By finish: solid color, flake, quartz and metallic. Most garage floors will have an epoxy base, flake and clear top, and metallic floors can be found on their own page.
How much do polyurea floors cost?
Typically more expensive than a pure epoxy coating. It is often the top coat in a series of coatings. The number of coats, whether flake is in between and how thick the coating is will affect the price.
As it cures quicker, you can get your garage back quicker. We can give you prices for both systems.
How much does it cost to do a garage floor coating?
Mostly depends on condition of concrete. If concrete is clean and in good condition, we just grind and coat.
If there are cracks to be filled, oil deeply embedded in concrete, salt scaling near entrance after a cold winter in Independence or a store kit to be ground off, more hours will be required. We will need to see the garage or your photos to give an accurate price.
How much would it cost to epoxy a 20x20 garage?
A 20x20 garage is 400 sq ft.
The price will depend on what is being stored and moved, whether you want stem walls and steps to house coated, how many joints need filling and what blend of flake you would like. If you send us photos we can give you an accurate price for this floor.
How much is epoxy flake flooring per square foot?
Price per square foot will depend on the build. How thickly we apply chips, how many clear coats and whether the top coat is epoxy/polyaspartic will affect the price. Custom chip blends can be more expensive than stock colors.
Let us know the floor finish desired and floor size.
Is epoxy flake waterproof?
Water resistant. Snow melt from vehicles will not penetrate into the concrete.
Cannot prevent rising moisture. We test for dampness in the floor.
How do you prepare a garage floor for coating?
We do the preparation: we remove oil with degreaser, grind the whole floor surface with diamond tools, fill cracks and pitting, then thoroughly vacuum before the first coat.
New concrete should be left to cure for a minimum of 28 days (Euclid Chemical Application Guide). Many garage floors begin to blister/peel because of applying a kit to unground concrete.
Is polyaspartic good for driveways?
Epoxy is not suitable outdoors. Good options are a polyaspartic coating or penetrating silane/siloxane sealant.
Polyaspartic coatings produce a colored effect, whereas penetrating sealants will maintain the appearance of the concrete, but provide grip and breathability. This is a good option for driveways in Independence, that receive salty de-icing treatments every winter.
What does the term "polyaspartic" refer to?
Polyaspartic is a slower curing form of polyurea, so we can apply it by rolling, but it still cures faster than epoxy.
We typically apply it as a clear top coat over an epoxy base and flake system in garages. However, we can also apply it as a standalone system. Our garage page has a comparison.
Is epoxy flooring slippery when wet?
Glossy epoxy coatings may be slippery, however we can add fine grit to give grip. The floor can still be easily mopped.
In flake systems, starting grip will be higher. Let us know where water tends to pool and we can adjust the grit accordingly.
How much does it cost to have someone epoxy a basement floor?
The number of coats, and the cost, depend on whether the concrete is dry or damp. If damp, we must apply a moisture blocking primer before the main system, increasing material and number of coats.
And obstructions in the room. Steps, pillars, furnaces and water heaters can all create delays, as well as boxes, adding many hours to the time. We can give costs once we have tested this.
Can you put epoxy on your basement floor?
Typically yes, however due to rising moisture issues in basements, coatings may lift from underneath. As basements are in contact with ground, moisture can rise up from underneath.
We will test for dampness first, and select the correct system. Where appropriate, we use a primer for damp concrete. Our basement page has more information on testing.
Is metallic epoxy flooring expensive?
Usually more expensive than a flake or solid floor system. This is due to the complexity of the application process. We apply metallic pigments manually in wet resin.
We apply more coats, and strict preparation is required. Let us know what size room it is and what overall effect you desire. If you can, include a picture of the desired finish.
What are the disadvantages of polished concrete?
Hard, and it hides very little. Cracks, patching and discoloration in the concrete will be visible in the finish.
If the concrete surface is very soft or worn, it may be difficult to achieve a good finish. In workshops/showrooms these considerations are rarely an issue, however in rec rooms in basements they may be.
What are the different levels of polished concrete?
Polished concrete has multiple finishes available, going from a matte, flat finish, to satin, and highly polished to mirror-like. We achieve the level of polish using increasingly fine diamond abrasives. The polish level is determined by the reflectiveness of the floor, rather than just shininess.
We can advise the best finish for your room. Our polished concrete page has further details.
How long does commercial epoxy flooring last?
Depends on amount of traffic in the room. If forklifts, pallet jacks or dragged carts are in use, the floor will wear more quickly than on foot traffic. A thick system will last longer than a thin system.
As wear will occur on the clear top coat, we plan to re-apply this before wear becomes an issue on the color. We cannot guarantee how many years the floor will last.
Ask us the question we missed
Give us a call and let us know what type of floor you have (garage, basement, shop), how big (approx) it is, what is currently on it and which town it’s in, and we can answer for you.
(816) 325-3549Open Monday to Saturday, 7am to 7pm
