Garage floor epoxy in Independence
We apply our garage floor epoxy system (thick base, full flake broadcast, clear polyaspartic top coat) to ground concrete. It covers salt pitting, oil stains and dusty concrete in Independence, Blue Springs, Raytown and Sugar Creek.
Salt-ready garage floors
Before we come: Note if paint or retail kits are already on the concrete. If peeling, it may affect how much grinding is required.
Quick answer
What is the best type of coating for a garage floor?
Typically the best choice in Independence garages is a system. Thick epoxy base, full vinyl flake broadcast and clear polyaspartic top coat. The polyaspartic top coat (aliphatic polyurea) won’t yellow from the light coming from an open door, is suitable for light foot traffic in hours, and can be applied over a wider temperature range than epoxy. The flake provides a decorative effect and extra grip. The clear top coat is the surface that vehicle tires will run over.
What our garage floor job includes
Flake is what you see. Grip is provided by the grinding below. We will never acid etch garage concrete.
Grinding a profile into the slab
Diamond grinding the slab
We create a mechanical profile for bonding (rated between 1 and 10 in CSP by ICRI). Diamond grinding creates a profile between CSP 1 and 3, whereas shot blasting creates a deeper profile (CSP 3 to 7).
Old film and stains off
We can remove peeling retail kits/paints/oily stains during grinding. Acid etching cannot achieve this effect. It only creates a shallow profile (CSP 1 to 2), and cannot remove curing compounds (Sherwin-Williams).
Epoxy base and flake
Body of the floor, with wet vinyl flake mixed in. A flake epoxy floor provides a textured surface and covers small pitting.
The door line and edges
Where salt water pools for the longest period of time and old coatings fail the quickest is along the doorway and walls. We fill pitting and grind it level.
The clear top, by hand
Wear surface is provided by the polyaspartic top coat. We run our hand and a low intensity light over the surface to check for thin areas, bubbles and loose flakes.
Cure times before we go
We will be able to tell you when it is safe to walk and park on. Chemically cured in approx. 7 days. Avoid using jack stands, heavy shelving and spilled liquids on the floor for 7 days.
Epoxy base coat and polyaspartic topcoat, side by side
Typically both. The thick epoxy body provides the body of the floor, and the polyaspartic floor coating on top can withstand vehicle tire pressure, salt and sunlight.
| Layer | Epoxy base | Polyaspartic top |
|---|---|---|
| Where it sits | Bonded straight to the ground slab, under the flake | Over the flake, the surface your tires and shoes touch |
| How it works | Cures slowly into a hard, thick body that grips the profile | Aliphatic polyurea: cures fast and keeps its color in sunlight |
| Usually found on | Garages, basements and shops as the build coat | Sunny garages, or a full polyaspartic garage floor on its own |
| What failure looks like | Peeling in sheets where the prep was thin or skipped | Dull, scuffed lanes where the tires turn and stop |
| What a safe repair needs | Grinding the loose film off, down to sound concrete | Sanding the old top so a fresh coat can bond to it |
Signs your Independence garage floor needs a coating
- White flaking/scaling from dripping salt water from vehicles near the door.
- Stains from absorbed oil.
- Gray dust on shoe tread and vehicle tire treads from powdery bare concrete.
- Retail kits peeling/flaking in vehicle tire lanes.
- Annual salt rings.
If 2 or more of these describe the condition of your garage, give us a call and we can come to take a look.
A finished flake floor
Garage floor questions we hear
If none of these issues are in your garage, give us a call and ask!
Should concrete in a garage be sealed?
Yes in garages exposed to salt, as porous concrete means salt slush and oils from vehicles will penetrate into the concrete, causing staining and scaling.
A penetrating sealant will make it water repellent, maintaining a gray appearance. However, no wearing surface is provided and it will need to be reapplied. A garage floor coating provides a film that can be mopped, and the flake provides grip on wet surfaces.
Does epoxy flooring increase home value?
We do not have local data to confirm this, however we can confirm that it will prevent dust from falling from the floor, oil from being absorbed and give the impression of a finished room in your garage.
Whether it is value for money in your house is a fair question to ask. Consider both sides in our article on when garage floor epoxy pays off.
Tell us about your garage floor
Garage floor epoxy cost depends on size, condition of concrete, and how much old coating needs to be ground off. Let us know size of garage, current coating, and what it is used for (2 cars, work bench, home gym etc.)
(816) 325-3549Open Monday to Saturday, 7am to 7pm
