Metallic epoxy floors in Independence
Metallic epoxy coatings swirl pigments in clear resins to create an effect similar to poured stone, pearls or brushed metal. A plain gray basement or rec room can be transformed into the most attractive floor in your house. We can apply metallic epoxy floors in Independence, Blue Springs, Raytown and Sugar Creek.
Swirled indoor floors
Before we come: If possible empty the room. If there are old patching, painting or glue lines in the room, these will show in the metallic coating.
Quick answer
What color options are available for epoxy garage floors?
Solid colors, flake mixes and metallic pigments. Solid colors can be light grays/tans, right through to charcoal or bright colors. With flake mixes, we scatter colored flakes in a base coat. These can be selected from pre-made mixes, or mixed to suit the room. Metallic pigments give the most flexibility. We swirl pearl, copper, silver, charcoal or dark blue pigments in clear resin. The color of the primer underneath can also influence the color. Most people choose flake mixes for working garages. We keep metallic for internal rooms.
What a metallic floor job includes
The swirling effect in this basement floor is dependent on the preparation carried out. The grinding, repairs and tinted priming will create a clean and long lasting finish.
Metallic floor in a home bar
Grinding and patching
We diamond grind the entire surface. We fill cracks, pitting and old anchor holes to create a flush surface. If there are any imperfections on the surface of the slab, such as peaks and pocks they will show in the swirled effect, and aged slabs may require extra preparation.
Tinted primer coat
Choosing a tinted primer below the metallic will allow you to decide on the light/dark finish. With the same tints a light colored primer will give a completely different floor from a dark primer. We can choose the tint with you.
The metallic coat
We apply the metallic coating as a tinted clear resin. While still wet we use rollers, brushes and air to create the desired swirling effect. We can achieve either large or small marble effects in this coat.
Edges, steps and doorways
We create clean edges around walls, stair noses and thresholds to meet with other flooring (carpet, tile or wooden stairs). We also create neat edges around floor drains and posts.
Low-light inspection
After curing, we run a work light across the surface of the floor to check for any dust, pin holes or dull spots the clear coating would lock in.
Clear topcoat and walk-on
We apply a clear sealant to protect from scratching. We will let you know when socks, shoes and furniture can be placed back in the room, as well as cleaning instructions.
Metallic epoxy compared with a solid color coat
Solid colors give a uniform finish. Metallic gives more character, and requires more from the concrete below.
| What to weigh | Metallic coat | Solid color |
|---|---|---|
| Best rooms | Basements, rec rooms, finished living space and indoor showrooms | Laundry rooms, workshops, utility rooms and plain storage basements |
| How the look forms | Pigment swirled through clear resin and shaped by hand while it is wet | One pigmented coat rolled out to a flat, even tone across the room |
| Usually picked for | A floor people stop and look at, unlike any other in the house | A clean, bright floor that stays quietly out of the way |
| What goes wrong | Patches, grind marks and old cracks show through the swirl as lines and halos | Dust and scuffs show more on the very dark shades |
| What the slab needs | Ground flat, patched flush, a tinted primer and a clear topcoat over it | A sound ground surface, cracks filled, and a topcoat in busy rooms |
Signs a metallic floor fits your room
- Your basement slab is dry and sound
- The rec room flooring (carpet/vinyl) is stained and worn. You’d like a hard floor to easily wipe.
- Paint is coming off in patches from your basement floor. Touch ups are no longer hiding it.
- You’d like unique colors in your flooring, different from others in the area.
- This room is internal so will be protected from road salt, sunlight from an open door and hot tires.
If 2+ of these reasons apply to your room in Independence, please get in touch.
Swirl pattern up close
Tell us about the room you want redone
Let us know the room size, current flooring, whether it has ever been damp, and the desired colors. Photos of the slab will be helpful. We can simply let you know if this slab can be coated as a metallic, or if repairs are needed first.
(816) 325-3549Open Monday to Saturday, 7am to 7pm
